DC-One
Owner‘s Manual 33
Input
This window is where the global input mode is set. Use the
<SELECT> key to navigate to the MODE parameter. Use the up/
down VALUE arrows to choose between
Analog
and
Digital
input.
LCD
LCD settings allow the user to adjust the contrast preferences of the
LCD screen to compensate for different lighting conditions that may
be encountered within different venues. Use the <SELECT> key to
navigate to the CONTRAST parameter to choose the best setup for
your system. Use the up/down VALUE arrows to choose between: -
10 to + 10 LCD contrast.
Limiter Units
In this window you can select between dBu and Volt for Limiter
units. Use the <SELECT> key to navigate to the UNITS parameter.
Metering
Users can set their
VU
metering preferences here.
Use the <SELECT> key to navigate to the MODE
parameter. Use the up/down VALUE arrows to
choose between Normal Fast, Peak Hold and Slow
Decay.
Temperature
This parameter
is used to calculate the speed of sound for
converting delay times into distance. Use SETUP Temperature to
adjust number of degrees and type of temperature base. Use the
<SELECT> key to navigate to the TEMP and UNITS parameters.
Use the up/down VALUE arrows to choose between – 4.0 F to
140.0 F. The UNITS parameter lets the user choose between
Fahrenheit and Celsius.
Summary of Contents for DC-One
