Installing the U-bracket - optional accessory
To install the U-bracket, do the following:
1.
Install the four screws (provided) into the U-bracket mounting points.
2.
Install an 8-mm rated forged eyebolt (not included) into the safety point.
3.
Secure the subwoofer from the safety eyebolt using a rated fittings and steel cable.
Suspending the subwoofer in a down-fire position using the U-bracket
To suspend the subwoofer in a horizontal down-fire position, do the following:
1.
Install two 8-mm rated forged eyebolts using lock washers (eyebolts and lock washers
not included) into the fly points on the U-bracket.
2.
Install an 8-mm rated forged eyebolt (not included) into the safety point.
3.
Suspend the subwoofer from the eyebolts using rated fittings and steel cable.
4.
Secure the subwoofer from the safety eyebolt using a rated fittings and steel cable.
Installing the transformer input panel - optional accessory
To install the transformer input panel, do the following:
4.4
4.5
EVID-S Surface Mount Dual 10” Subwoofers
2017.08 | 01 | F.01U.345.359
Installation manual
Electro-Voice
