background image

Introduction

The EVID-S10.1D subwoofer, from Electro-Voice, is a compact, high-performance, dual woofer
loudspeaker with outstanding performance for the most demanding professional and
commercial sound applications. Designed and engineered for use in background and
foreground music, and sound reinforcement applications, the EVID-S10.1D subwoofer is the
ideal solution for indoor and outdoor applications, such as restaurants, bars, patios, retail,
fitness clubs, hospitality, theme parks, leisure venues, and others. Ease of installation, and
flexible options for mounting solutions and weather resistance, the EVID-S10.1D subwoofer is
the perfect solution for a wide variety of surface mount applications.
 
The EVID-S10.1D subwoofer has been carefully engineered to resist outdoor environments,
without compromising on performance for indoor applications. The subwoofer is IP54 rated,
and its weather-proofing is complemented with exceptional cabinet and grille resistance
against sun, salt and moisture. For the toughest weather conditions, the IP rating of the EVID-
S10.1D subwoofer can be upgraded to IP65, using the included port plug accessory.
 
Read through this manual to familiarize yourself with the safety information, features, and
applications before you use these products.

System features

Two 10 inch high-excursion woofers

Carefully engineered for outdoor environments (IP54 and IP65), without compromising
performance

400 W power handling provides for 120 dB maximum SPL (126 dB peak)

70/100 V transformer input panel accessory available

Crossover input panel accessory available

 

3

3.1

EVID-S Surface Mount Dual 10” Subwoofers

  

2017.08 | 01 | F.01U.345.359

Installation manual

Electro-Voice

Summary of Contents for EVID-S10.1DB





























Reviews: