Electro-Voice EVID-S12.1B Installation Manual Download

Page: 11 / 16

Technical data

Frequency response (-10 dB): 40 Hz – 140 Hz

Sensitivity: 104 dB

Max. SPL (Calculated): 127 dB (133 dB Peak)

Power handling: 200 W (800 W Peak) Continuous Pink Noise (100 hours)

Low Z: Yes

Nominal impedance: 8 Ω

LF transducer: 12 inch (305 mm)

Connectors: Spring loaded

Color: Black (RAL 9004) or white (RAL 9003)

Dimensions (H x W x D): 413 mm x 584 mm x 303 mm (16.3 in x 23.0 in x 11.9 in)

Net weight: 17.8 kg (39.2 lb)

Shipping weight (pair): 22.4 kg (49.4 lb)

Included hardware: (1) Wall mounting hardware

Packaged quantity: 1

Eighth (1/8) space (corner mounting).

Eighth (1/8) space (on corner) averaged 60 Hz – 100 Hz, 1 W.

Without mounting hardware.

Dimensions

584.2 mm [23.00 in]

412.8 mm

[16.25 in]

303.3 mm

[11.94 in]

6.1

Electro-Voice

Installation manual

2017.08 | 01 | F.01U.347.028

Summary of Contents for EVID-S12.1B

















Search results

Summary of Contents for EVID-S12.1B

Reviews:

Related manuals for EVID-S12.1B

Brands by name

Popular brands

Electro-Voice EVID-S12.1B, Installation Manual

Search results

Summary of Contents for EVID-S12.1B

Reviews:

Related manuals for EVID-S12.1B

Brands by name

Popular brands