16
en | Amplifier DSP
EVOLVE Portable Column Loudspeaker
2021-04 | v04 | F.01U.393.750
User manual
Electro-Voice
5.2
System status
Normal
1
5
6 7
4
3
2
8
9
Figure 5.1:
Normal system status home screen with Bluetooth® status
1.
VOLUME (VOL)
- Indicates the master gain of the system in dB. The range is from mute to
+10 dB, in 1 dB increments.
2.
1, 2, 3, 4, 5-6, 7-8
- VU meter displays the signal level of INPUT1 through 7/8 into the
amplifier. Input levels are independent of each other.
3.
AUX
- VU meter displays the signal level of the AUX output. AUX level is independent of
MAIN levels.
4.
MAIN
- VU meter displays the signal level of the MAIN output. MAIN level is independent
of AUX levels.
5.
C
- Control app; the available options are:
OFF - DISABLED
FLASHING - PAIRING MODE
SOLID - CONNECTED
6.
1
- Indicates the selected store function number. There are five user defined store
function numbers available.
7.
E
- Indicates the preset is not saved. When the preset is saved the E is not displayed.
8.
S
- Audio streaming; the available options are:
OFF - DISABLED
FLASHING - PAIRING MODE (120s)
SOLID - CONNECTED
9.
FUNCTION indicator
- Indicates whether the system is in MIXER or BASIC mode.
i
Notice!
Bluetooth® is available in select countries.
Contact your nearest Electro-Voice dealer or Electro-Voice distributor for more information.
System protection
System protection limiters indicate when a system is exceeding recommended usage by
indicating CLIP or LIMIT on the LCD display.
CLIP
CLIP
indicates the signal to the loudspeaker is too high, resulting in a clipped signal into the
loudspeaker. If CLIP is shown, reduce the input gain and/or the signal on the mixer or source
equipment.
