EVOLVE Portable Column Loudspeaker
Amplifier DSP | en
27
Electro-Voice
User manual
2021-04 | v04 | F.01U.393.750
i
Notice!
If connected with a mobile device, notification alerts and ring tones will also be played
through the system.
Disable these notifications or enable Airplane mode on your mobile device to prevent
unwanted interruptions during audio playback.
LED Menu
The
LED
menu
shows power on and indicates limit. Available options for this selection are:
ON, OFF, or LIMIT.
–
ON
- turns the LED on when the power to the loudspeaker is ON. (Default)
–
OFF
- turns the LED off.
–
LIMIT
- turns the LED off under normal operation. The LED brief blinking indicates the
limiter is activating. Short-term blinking is not critical because the integrated limiter
keeps distortion under control. Constant lighting of the LED indicates the sound is
negatively affected. If the LED is constantly lit, check the rear LCD for more information.
Reducing the output volume is strongly recommended.
DISPLAY Menu
The
Display
menu
options are BACK, LCD DIM, BRIGHT, and CONTRAST.
LCD DIM Menu
The
LCD Dim
menu
is used to dim the display when the display is idle for 30 seconds.
Available options for this selection are: ON or OFF.
The default is ON.
BRIGHT Menu
The
Bright
menu
is used to determine the brightness of the LCD.
The range is 1 to 10.
The default is five (5).
CONTRAST Menu
The
Contrast
menu
is used to increase or decrease the visibility of the LCD screen.
The range is 1 to 10.
The default is five.
STORE Menu
The
Store
menu
allows you create up to five customized user settings. Available options for
this selection are: EXIT, 1, 2, 3, 4, and 5.
i
Notice!
The customized user setting name can contain a combination of alphanumeric characters
including spaces. The alphanumeric character range is A to Z and 0-9.
The name field length is 11 characters.
Storing customized user settings
To store customized user settings, do the following:
1.
From the DSP menu, scroll to
STORE.
2.
Push the
MASTER VOL
knob to select
STORE
.
The store screen appears.
3.
Push the
MASTER VOL
knob to select 1.
The Enter name for 1 screen appears.
4.
Use the
MASTER VOL
knob to scroll through the characters.
The characters appear.
5.
Push the
MASTER VOL
knob
to select the desired character.