background image

3

MH6040AC Coaxial Constant-Directivity Manifold Technology

 Horn System

MH6040AC Coaxial Constant-Directivity Manifold T

echnology

 Horn System

1,250 Hz, and be driven by two 10-inch,

weather-resistant drivers with high-technol-

ogy cones of Kevlar

®

 and epoxy.

1

 The pat-

ented Manifold Technology

®

 technique shall

be exploited and result in a power-handling

capacity of 600 watts per EIA Standard RS-

426. The average axial sensitivity shall be

105 dB SPL at 1 meter with 2.83 volts ap-

plied. The frequencies above 1,250 Hz shall

be produced by the supplied Electro-Voice

HP640 TransPlanar 

TM

 constant-directivity

horn with user-selectable driver combina-

tions.

The horn bell manifold chamber and back

covers shall be constructed of fiberglass,

foam and polyester resin. Two steel mount-

ing rails shall be provided to coaxially mount

the Electro-Voice HP640 horn. The horn

shall have an integral rear mounting bracket

made of black powder-coated 10-gauge steel.

Brackets shall be provided at the front of the

horn to stabilize and aim the MH6040AC.

The horn shall be 149.9 cm (59.0 in.) high,

99.1 cm (39.0 in.) wide, 153.4 cm (60.4 in.)

long and weigh 75 kg (165 lb).

The horn shall be the Electro-Voice

MH6040AC coaxial constant-directivity

Manifold Technology 

®

 horn.

Limited Warranty

Electro-Voice products are guaranteed

against malfunction due to defects in mate-

rials or workmanship for a specified period,

as noted in the individual product-line

statement(s) below, or in the individual prod-

uct data sheet or owner’s manual, beginning

with the date of original purchase. If such

malfunction occurs during the specified pe-

riod, the product will be repaired or replaced

(at our option) without charge. The product

will be returned to the customer prepaid. Ex-

clusions and Limitations: The Limited

Warranty does not apply to: (a) exterior fin-

ish or appearance; (b) certain specific items

described in the individual product-line

statement(s) below, or in the individual prod-

uct data sheet or owner’s manual; (c) mal-

function resulting from use or operation of

the product other than as specified in the

product data sheet or owner’s manual; (d)

malfunction resulting from misuse or abuse

of the product; or (e) malfunction occurring

at any time after repairs have been made to

the product by anyone other than Electro-

Voice Service or any of its authorized service

representatives. Obtaining Warranty Ser-

vice: To obtain warranty service, a customer

must deliver the product, prepaid, to Elec-

tro-Voice Service or any of its authorized

service representatives together with proof

of purchase of the product in the form of a

bill of sale or receipted invoice. A list of

authorized service representatives is avail-

able from Electro-Voice Service at 600 Cecil

Street, Buchanan, MI 49107 (800/234-6831

or FAX 616/695-4743).  Incidental and

Consequential Damages Excluded: Prod-

uct repair or replacement and return to the

customer are the only remedies provided to

the customer. Electro-Voice shall not be li-

able for any incidental or consequential dam-

ages including, without limitation, injury to

persons or property or loss of use. Some

states do not allow the exclusion or limita-

tion of incidental or consequential damages

so the above limitation or exclusion may not

apply to you. Other Rights: This warranty

gives you specific legal rights, and you may

also have other rights which vary from state

to state.

Electro-Voice Speakers and Speaker Sys-

tems are guaranteed against malfunction due

to defects in materials or workmanship for a

period of five (5) years from the date of origi-

nal purchase. The Limited Warranty does not

apply to burned voice coils or malfunctions

such as cone and/or coil damage resulting

from improperly designed enclosures.

Electro-Voice active electronics associated

with the speaker systems are guaranteed for

three (3) years from the date of original pur-

chase. Additional details are included in the

Uniform Limited Warranty statement.

For  warranty repair or service informa-

tion, contact the service repair department

at: 616/695-6831 or  800/685-2606.

For technical assistance, contact Technical

Support at 800/234-6831 or 616/695-6831,

M-F, 8:00 a.m. to 5:00 p.m. Eastern Stan-

dard Time.

Specifications subject to change without

notice.

Summary of Contents for MH6040AC









Reviews: