background image

17

TECHNICAL SPECIFICATIONS ECM 1 MKII

The following technical data were measured on randomized test objects and are 

typical data. All measurements are made at 120V / 240V // 50Hz / 60Hz. 
Clipping point of the amplifier is set to a level where total harmonic distortion (THD) is 0.2 %

.

Preamplifier section

Noise floor (1Vrms, 20 - 20 kHz, balanced).  < -145dB  

Frequency responce: 0.5 - 48 kHz

THD + N: < 0.0005%   

DAC section

• Upsampling rate: 192 kHz, 24bit

• Digital/Analog Conversion: 192 kHz, 24 bit

  

  Input sampling rate: 

    • 2x TosLink SPDIF  -  192 kHz, 24 bit

    • 2x Coax SPDIF  - 192 kHz, 24 bit

Streamer section

   • Network connection: Wi--Fi or LAN

   • Advanced 802.11 AC WiFi with MIMO

   • 1x Gigabit Ethernet (1000Mbps)

   • 1x USB for external storage

   • 1x SPDIF Coax output

   •  iOS, Android and Web app

Streaming services

   • Airplay

   • Spotify Connect

   • TIDAL

   • Qobuz

   • Bluetooth

   • Internet Radio

   • DLNA as renderer 

Internal drive: Docking, self installation .5”/2.5” - unlimited capacity.

Number of channels:  2 ch

Dimensions

Width:  470 mm - 18.5 inches

Depth:  381 mm - 14.99 inches

Height: 80 mm - 3.14 inches

Weight: 8.3 Kg -  18 lbs

 *(without internal drive)

*Specifications are subject to change without notice.

Summary of Contents for ECM 1 MKII





















Reviews: