How to avoid noise problems
The EMP 1 contains delicate circuits that are sensitive to
magnetic stray fields.
The unit should not be placed near main transformers, TV sets,
etc. Care should also be taken regarding placement of the
interconnect cables. Do not run interconnect cables in parallel
with main cords or speaker cables. Keep interconnect cables as
short as possible.
How to power up your system
You should always power up your system the following way:
1- Signal sources first.
2- Preamplifier
3- Power amplifier(s)
How to power down your system
When switching off your system:
1- Start with the Power amplifier(s)
2- The preamplifier
3- The signal sources.