Bariatric Wheelchair Mover—Operating Manual
17
Appendix 3: Hitch release instructions
The powered hitch function of the Bariatric Wheelchair Mover has built-in safety
controls to limit the output force of the hitch. When this force is exceeded, the
hitch will stop.
1. In the event of the hitch stopping unexpectedly, press the ‘unlock’ button on the
hitch controls. This resets the safety circuit, and allows the hitch to function normally.
2. If, for some reason, the hitch is overloaded in its extreme ‘unlock’ position, there is
an alternative method of ‘driving’ the hitch out of a bind. This will only work if the
hitch is in its unlock position. Whilst holding the hitch ‘unlock’ button on the controls,
press the button simultaneously. This will momentarily override the safety circuit to
get the hitch working in its normal range.
Please note:
These instructions should only be carried out by a qualified
maintenance technician. If there is any uncertainty, please contact your local
Electrodrive Authorised Service Agent for further advice.
To avoid the hitch being unnecessarily overloaded, please avoid locking the
wheelchair into the hitch.
