Bariatric Wheelchair Mover—Operating Manual
7
Controls
Key switch
The key switch must be turned clockwise to switch the Bariatric Wheelchair Mover on.
When on, the LED status indicator will be illuminated. It is important to note that the unit
should be switched off and the key removed, whenever it is not in use. This eliminates
the risk of unauthorised movement and also prevents an unnecessary use of battery
power.
Emergency back-off bar
When the Emergency back-off bar is activated (depressed) while in motion, the Bariatric
Wheelchair Mover will behave in one of two ways.
1. In reverse (towards the operator), the Bariatric Wheelchair Mover will stop and then
move away from the operator for a short distance.
2. In the forward direction, the Bariatric Wheelchair Mover will reduce to a slow speed.
Any accessories installed that prevent the safe operation of the
emergency back-off bar may create a crush hazard for the user.
Throttle
The throttle provides variable speed control. Releasing the throttle stops the unit.
An automatic park brake is applied after a short delay after the grip has returned to its
neutral position. Under no load, the park brake will maintain the Bariatric Wheelchair
Mover in a stationary position. Under load, the brake may not be capable of holding the
system stationary, particularly on a sloping surface.
Battery level indicator
The battery level indicator indicates the amount of charge
left in the batteries. When it appears to be running low,
return the Bariatric Wheelchair Mover to the closest
charging station to charge the batteries.
Speed selector
Select a speed that you are comfortable using. The
speed can be changed whilst driving. It is advisable that
the operator select a slow speed when approaching a
wheelchair to hitch; entering a confi ned area; on a slippery
or slightly sloped fl oor surface; turning, or reversing.
Speed selector
Battery level
indicator
