This document is a property of ElectroFlip LLC No unauthorized reproduction is allowed.
4
INSIDE THE PACKAGE
•
Retail iSee unit (MicroSD card not included)
•
USB Data and Charging Cable
•
Hard Shell Sunglasses Case
•
Lens Cleaning Cloth
•
Online User Guide
GETTING STARTED
CHARGING THE BATTERY
The batteries of this device can be charged by plugging the USB cable into a computer. The device would
require 3 – 4 hours of charging (fully charge). For the initial charge or the first 3 uses of the device, make
sure to charge the batteries for at least 12 hours but not more than 24 hours. When charging the batteries,
a red LED light will lit up and it will extinguish once the device is fully charged.
NOTE: It is suggested to charge the batteries before use if the device has not been used for awhile.
Batteries will charge faster when the device is powered down.
INSERTING A MEMORY CARD
The device is equipped with a Micro SD card slot for expanded memory. Please follow the steps below on
how to insert the memory card to the device.
1.
Format the memory card before inserting it to the device.
2.
Locate the memory card slot on the device.
3.
It's a spring loaded slot which requires the memory card to be pushed down until it locks into
place. Do not exert too much force when you push down the memory card.
4.
To remove the memory card, softly push down the memory card to unlock it.
