This document is a property of ElectroFlip LLC No unauthorized reproduction is allowed.
7
Using the Memory Card
1.
Insert the memory card of your iSee to a card reader then connect the card reader to your
computer.
2.
Open My Computer and locate the removable disk pertaining to your memory card. It
may be labeled as D:, E:, or F:.
3.
Open the removable disk drive and drag and drop the video clips from the memory card to
your desktop (or whichever location you prefer to save the files). You can also do copy and
paste.
4.
Play the video files using QuickTime, RealPlayer or any video player that supports the video
format of the device. It is recommended to playback video files directly from the hard drive
of your computer to ensure a smooth playback.
5.
After you are finished uploading the files, make sure that you use the hardware removal
tool located on the browsers tool bar. Failure to do so can corrupt or damage the devices
data storage.
TIME AND DATE WATERMARK
To watermarked your video with the current time and date, follow the steps below:
1.
Open Microsoft NotePad (or equivalent) and type:
[date]
2015/10/11
13:29:15
2.
Adjust the date and military time accordingly then save the file on the root directory of the memory
card with the name “TAG.txt”
3.
Turn the device on and record a short clip then turn off the device. Repeat the same steps once
more and the second video clip recorded and all videos going forward will have a time and date
watermarked on them.
Please see screen shots on the next page.
