This document is a property of ElectroFlip LLC (www.ElectroFlip.com).
No unauthorized reproduction is allowed.
15
Sleep by Shock Sensor
When this is setup, the tracker will enter sleep mode if no vibration is detected. GPS module
shuts off and
LED lights turn off
. Vibrations or any operations can wake up the device. To
activate this mode, send a text message containing:
Message Format:
sleep+pspace+shock
Text Message: sleep123456 shock
Reply: sleep shock ok
Deep Sleep by Shock Sensor
When this is setup, the tracker will enter sleep mode if no vibration is detected. GPS module
shuts off and
LED lights turn off
. Only vibration can wake up the device and it sends a
message automatically after it wakes up. To activate this mode, send a text message containing:
Message Format:
sleep+pspace+deepshock
Text Message: sleep123456 deepshock
Reply: sleep deepshock ok
Scheduled Wake at Specific Time (GPRS Mode Only)
This feature is intended only if you plan to operate the device in GPRS mode. The device will
awaken on its own at a given time or according to schedule. When this feature is activated, the GPS
module will shut off as well as the LED lights. To activate this feature, send a text message
containing the command format below:
Message Format:
spspace+days ispace+time+comma+time
Text Message: schedule123456 1 08:00,12:00
Reply: schedule ok
The above configuration will set the tracker to awake at 8:00 and 12:00 every day and works for 5
minutes. You can configure 5 specific times at most with the command above.
To cancel this function, please send the text command below:
Message Format:
nospassword
Text Message: noschedule123456
No Sleep Mode
To turn off sleep mode, send a text message containing:
Message Format:
sleep+pspace+off
Text Message: sleep123456 off
Reply: sleep off ok
