Steps to Install the SIM Card:
1.
Loosen 4 screws with the screw driver included.
2.
Remove the back cover and insert the SIM card into the slide slot with the gold-plated
contacts facing downwards.
3.
Put the cover back with the USB side and gently and evenly tighten 4 screws back in.
4.
Insert the 4 waterproof plugs over the screws.
CHARGING and CLIP ASSEMBLY
Charging
Connect the PeTrack to the AC Adapter via the USB
cable. For the first two charges, charge overnight to
help condition the battery.
REMEMBER:
Once the PeTrack is fully charged you will see the Red LED turn off. Once
disconnected from the charging cable, power cycle before using the PeTrack.
Clip Assembly
Put the collar included (or your own) through the
clip.
BUCKLE LOCKING CLIP
Assemble the PeTrack and the clip according to the arrow mark on both sides. Turn
counterclockwise to lock it (
VERY IMPORTANT
). Please refer to the images on the next page.
This document is a property of ElectroFlip LLC (www.ElectroFlip.com).
No unauthorized reproduction is allowed.
6