36
Preparation:
• Press
TV/VCR
to select the TV/VCR mode.
• Load a cassette tape with the erase prevention tab intact.
• Press
DISPLAY/CALL
to verify that the time and date are correct
(see page 34).
EXAMPLE:
Program a timer recording for the 23rd day, channel
125 (CABLE), 7:00 - 9:30 PM on timer program number 1 (Tape
speed: SLP).
1
Press
SETUP/TV MENU
. Press
or
to select
option.
2
Press
or
to select “TIMER
REC SET”, then press
.
3
Press
or
to select one of
the program line, then press
ENTER
.
4
Press
or
to select the date,
then press
.
5
Set the
start time
,
end time
,
channel
and
tape speed
as in
step
4
, then press
ENTER
.
NOTES:
• Press
to move arrow
backward for correction.
• To record from external source
set the channel to “L” . “L” will
appear next to CH 125 (or 69).
6
To enter other programs, repeat
steps 3-5.
•
To return to the normal screen, press
SETUP/TV MENU
3 times.
7
Press
TIMER REC
. The TIMER REC indicator will light and
the VCR stands by for recording.
The timer recording will start at 5 seconds before the time you
predetermined.
NOTES:
• If the TIMER REC indicator does not light in spite of the
pressing of
TIMER REC
, the cassette may not have been
loaded yet (see page 29).
• If the cassette is ejected in spite of the pressing of
TIMER
REC
, the erase prevention tab of the cassette may have
been removed (see page 29).
/
/ ENTER/MENU
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– : – –
– : – –
– – – –
– – – – –
– : – –
– : – –
– – – –
– : – –
– : – –
– – – –
– : – –
– : – –
– – – –
– : – –
– : – –
– – – –
– : – –
– : – –
– – – –
– : – –
– : – –
– – – –
– : – –
– : – –
– – – –
TIMER REC SET
DATE
23(THU)
START
8:30AM
END
— — : — —
CH
012
SPEED
/
/
/
/ MENU
SP
CH
TIMER REC SET
DATE
START
END
CH
125
SPEED
/
/
/
/ ENTER/MENU
SLP
23(THU)
7 : 00PM
9 : 30PM
CH
2 3 T H
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
7 : 0 0PM
9 : 3 0PM 1 2 5
– : – –
– : – –
– – – –
– : – –
– : – –
– – – –
– : – –
– : – –
– – – –
– : – –
– : – –
– – – –
– : – –
– : – –
– – – –
– : – –
– : – –
– – – –
– : – –
– : – –
– – – –
/
/ ENTER/CANCEL/MENU
SLP
TIMER REC SET
AUTO REPEAT
OFF
/
/
/
/ MENU
CH
Timer recording
Timer recording can be programmed
on-screen with the remote control.
The built-in timer allows automatic
unattended recording of up to 8
programs within 1 month.
NOTES:
• If the TIMER REC indicator blinks
when the timer recording ended, the
TV program has not been completely
recorded because of an insufficient
tape supply. Press
TIMER REC
to
cancel the timer program or press
EJECT
to remove the cassette tape.
• During timer recording standby mode, the
VCR operation cannot be used. To use
the VCR operation, press
TIMER REC
to
deactivate the timer. After you use the
VCR, press
TIMER REC
again to put the
VCR into timer recording standby mode.
• If you press
TIMER REC
during timer
recording, the recording operation will
be interrupted. If you press
TIMER REC
again within the programmed time, the
recording operation will start again.
• After a power failure or disconnection of
the power plug, all programmed record-
ing settings and time display will be lost
upon resumption of power. In this case,
reset the clock (see pages 16-18) and
reprogram any timer recordings.
TIMER REC SET
AUTO REPEAT
OFF
/
/
/ MENU
CH
5W90601A [En]33-37
18/5/06, 2:50 PM
36
