- 20 -
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
The nap timer allows you to set a buzzer alarm to go off after a preset amount of time ranging from 90
minutes to 10 minutes.
1.
With radio off, press the
button to turn on NAP timer.
2.
Press the
button to toggle through the preset times; 90min > 80min > 70min > 60min
> 50min > 40min > 30min > 20min > 10min > OFF
3.
When enabled, pressing the
button will show current NAP timer and pressing again
will reset timer to 90 minutes
4.
When the NAP timer expires, it will continue to buzz for 30 minutes or it can be stopped by pressing
the POWER ON/OFF button.
5.
To cancel the NAP timer, press the
button until you see OFF
CYCLE DISPLAY
The CYCLE DISPLAY
function displays the TIME, MONTH/DAY & CURRENT TEMPERATURE on the
front LED panel in sequence.
1.
Ensure radio is OFF (RADIO ON/OFF button). Press and hold the CYCLE DISPLAY
button
on the side of the alarm clock until ON appears on the LED panel. Please wait 10 seconds for the
cycle to begin.
2.
To return to TIME display only, press and hold the CYCLE DISPLAY
button until OFF appears
on the LED panel.
ADJUSTING LED BRIGHTNESS
You can adjust the brightness of the LED display making it brighter, dimmer or even turning it OFF when
the radio is OFF. There are four dimming options available: HIGH/MEDIUM/LOW/OFF (Standby). Press the
button to toggle between the four brightness settings. The
symbol will appear on the LED screen when set to OFF to show that unit is in standby mode.
LISTENING TO THE RADIO
1.
Press the RADIO ON/OFF button on the front panel to turn the radio ON.
2.
Press hold the AM/FM
button to toggle between AM and FM radio bands.
3.
Press the
/
buttons once, to move back/move forward one station at a time.
4.
Press and hold the / buttons for one second to scan back/forward through
the stations; the unit will automatically scan to the next broadcasting station.
5.
Press and hold the RADIO ON/OFF button on the front panel to turn
the radio OFF.
NAP TIMER
