background image

25

V

arious settings

Setting the parental control

Some discs are specified as not suitable for chil-
dren. This unit can prevent playback of such discs.

Preparation:

•  Turn ON the TV and set it to the video input mode.
•  Select “PARENTAL” from “SYSTEM SETUP”. For the

procedure, see steps 1 to 3 in “Using the SETUP
MENU” on page 23.

NOTE:
• The selected level will apply to operations executed

after this.

• The unit cannot restrict playback of some discs.
• Some discs may not be encoded with specific rating

level information though its disc jacket says “adult”.
Parental control will not work with those discs.

• Do not forget the password. If you forget the pass-

word, contact the dealer that you purchased the unit
from.

Temporarily cancelling parental control

Parental control can temporarily be cancelled with some
DVDs.

1

Playback a DVD. (See page 33.)

2

If the DVD disc has been designed to temporarily
cancel the rating level, the screen that follows the
“READING” screen will change. If you select “YES”
with the ENTER, the message “YOUR DISC EX-
CEEDS THE PARENTAL CONTROL LEVEL
1.”(e.g.) will then appear.

3

If you wish to cancel the set rating level temporarily,
select “PARENTAL CONTROL LEVEL” with 

 or

, then press ENTER. If the password has been

selected, the password input screen will appear.
Alternatively, if the password has not been set, play-
back will commence. If you don’t know (or have
forgotten) the password, select “CANCEL PIC-
TURE”. The setting screen will disappear. Press
OPEN/CLOSE to remove the disc.

4

Use the numeric keys to input the password.
• To interrupt the input process, press RETURN.

5

Press ENTER.

6

Playback will commence if the entered password
was correct.

NOTE:
This temporary cancellation of the rating level will re-
main active until the disc is ejected.
When the disc is ejected, the original rating level will be
set again automatically.

Selecting parental control

Select “PARENTAL” and select the parental control level
from the list below.

Level Off:

Parental control is turned off.

Level 1:

Adult discs and general discs (R-rated
disks included) cannot be played back.

Level 2 to 3: Adult discs and R-rated discs cannot

be played back.

Level 4 to 7: Adult discs cannot be played back.

(Level 4 to 7 discs contain content chil-
dren age 15 and younger may not see.)

Level 8:

All discs can be played back without
restriction.

Select from level 1 to level 8.
On a scale of 1- 8, “1” is the most restrictive.

To lock the selected parental control level

1

To lock the selected parental control level, press

 or 

 to select “PASSWORD”.

2

Use the numeric keys to input a 4-digit password.

•  If you input a wrong number, press CANCEL.
•  Be sure to remember this number!

3

Press ENTER.

To cancel the locked parental control level

1

Select “PASSWORD” shown in step 1 of the above sec-
tion and use the numeric keys to input the password.

2

Press ENTER.
The locked mark “

” will change to an unlocked

mark “

”.

Then, you can change the parental control level, or
enter a new password.

----

change to

1234

YOUR DISC EXCEEDS THE PARENTAL

CONTROL LEVEL 1.

PARENTAL CONTROL LEVEL

CANCEL PICTURE

TIMER REC SET

SYSTEM SETUP

AV SETUP

REC SETUP

CH SETUP

OTHER

LANGUAGE

PARENTAL

CLOCK

DISC SETUP

OTHER

PARENTAL

PASSWORD

PARENTAL

SETUP MENU

RETURN

SETUP

ENTER

BACK

END

DELETE

CANCEL

-  -  -  -

INPUT NO.

0

9

SELECT

PARENTAL

OFF

ENTER

 2H6P001A[E] P22-32

6/28/05, 5:34 PM

25

Summary of Contents for DVRC802E

































































Reviews: