background image

11

Is it normal to hear pops and crackling when playing a record?

 

Dirt and debris on a record can cause popping and crackling noises. It is important to 
properly clean your records to ensure they are in the best condition for playback. Popping 
and crackling can also be caused by scratches, wear over time, or inherent flaws from vinyl 
production.

I’m hearing a buzzing noise through my speakers

 

It is important to ensure your turntable is properly grounded. Connect the ground wire to 
your amplifier or external preamp. If using an external preamp it may be necessary to add 
a second ground wire from the preamp to the amplifier/powered speakers. The turntable 
and other devices should be directly connected to a power outlet. It is recommended to 
avoid power bars or extension cables.

Can I charge my mobile phone with the USB port? 

The USB port is for recording only. The USB port will not charge a device, nor allow a 
mobile phone to play music. 

My records play too fast or too slow

 

There is a speed selector switch located on the side of the tonearm. The speed selector 
switch has 3 different settings (33 RPM, 45 RPM, OFF). Please ensure that you have selected 
the correct setting based on the record you are attempting to play. To change the speed, 
please adjust the selector switch to the required speed for the record you are playing.

I think I need to replace my stylus

 

The stylus installed in your turntable should last for up to 400 hours of playback with 33 
RPM or 45 RPM albums. First, we would recommend ensuring that the stylus is free of 
debris. Using a soft stylus cleaning brush to gently clean the stylus tip may improve sound 
quality. If this does not improve the sound quality a new stylus is available at:  

www.electrohome.com

What is the range of my Bluetooth® Connection?

 

The Electrohome RR36 operates with Power Class 2 Bluetooth® devices, which have a 
range of approximately 33 feet (line of sight).

Summary of Contents for RR35

















Reviews: