Electrohome RR75, Manual

13

My records play too fast or too slow 

There is a speed selector switch located under the lid of the turntable. The speed selector switch 
has 3 different speed settings (33 RPM, 45 RPM or 78 RPM). Please ensure that you have selected the 
correct setting based on the record you are attempting to play. To change the speed, please adjust the 
selector switch to the required speed for the record you are playing.

My CD player will not play a CD 

If you are experiencing difficulties with your CD player, please try testing the unit with a store bought 
CD to rule out any incompatibility issues. If the issue is on a specific CD it is recommended to clean the 
CD and test again.

I think I need to replace my stylus 

The jeweled stylus installed in your turntable should last for up to 300 hours of playback with 33 RPM 
albums or 45 RPM ‘Singles’. If you are playing older 78 RPM records, which are made from a much 
harder material, the life expectancy of the stylus will be reduced. First we would recommend ensuring 
that the stylus is free of debris. Using a soft stylus cleaning brush to gently clean the stylus tip may 
improve sound quality. If this does not improve the sound quality a new stylus is available at:  
www.electrohome.com

What is “auto-pairing” and how does it work? 

Auto-pairing is a convenient connection feature included on this system. If the connected Bluetooth®-
enabled device leaves the connection range of the system and returns at a later time, the device will 
automatically connect. If the device’s Bluetooth® function is disabled and then enabled at a later time, 
the device will automatically connect as well.  

*Note: The Electrohome RR75 will only auto-pair to the last device that it was connected to.

Another device is connected to my Electrohome RR75 and I want to connect my device.  

You can reset any Bluetooth® connection by pressing and holding the Bluetooth® button on the unit 
or remote for 3 seconds. 

What is the range of my Bluetooth® Connection? 

The Electrohome RR75 operates with Power Class 2 Bluetooth® devices, which have a range of 
approximately 33 feet (line of sight). 

Electrohome RR75 is not showing as an available device on my Bluetooth device.

Ensure the RR75 is not paired to another device. You can reset Bluetooth holding the Bluetooth button 
on the unit or on the remote for 3 seconds. Next turn Bluetooth off and back on in your device’s 
Bluetooth settings.  If the RR75 is still not available you can reboot your device and check again.