OPERATION
VistaGRAPHX 2500 User's Manual
3-16
Using the arrow keys, return to the setup window above the "Edit" button and
select the desired channel. Edit as necessary to accurately reflect your source
connections:
•
Channel#:
Enter any new valid number from 1-99. If the number you choose
has already been assigned, a message box will appear upon exiting the
channel window. Either cancel and enter a different number or overwrite the
old channel.
•
Channel Name: Enter a maximum of 16 lowercase characters and/or 12
uppercase characters to describe your channel (see Editing Text, above).
•
Switcher#: Enter "0" if the signal is physically connected to the projector
itself. Enter 1-9 if the signal is physically connected to a switcher.
•
Slot#: Enter 1-9 for a specific slot on a switcher or 1-4 for a connection to
the projector itself.
•
Checkboxes: Toggle any checkboxes as desired for the channel.
Repeat for each channel you wish to edit. Press
or
(using keypad) to
accept all editing.
NOTES: 1) For quicker access to “Edit” mode, press
at any time.
2) While in the pull-down Edit list, press
to switch to Delete mode, or
to
switch to Copy mode. See below.
Highlight and select the center button at the bottom of the
screen. From the pull-down list, select "Copy". This will turn
this button into a "Copy" button until you select a different
option — "Edit", "Delete", or "Update" — from the list.
Using the arrow keys, return to the setup window above the "Copy" button and
select a channel you wish to copy. The new channel will be defined with the
same settings from this setup and will be assigned the lowest available number
— the original setup remains intact.
NOTES: 1) For quicker access to “copy” mode, press
at any time. 2) Press
to copy the currently highlighted channel. 3) While in the Copy pull-
down list, press
to switch to Delete mode, or
to switch to Edit mode.
To delete a particular channel, select the center button at the
bottom of the screen and select "Delete" from the pull-down
list. Use the arrow keys to return to the setup window above
the delete button. Highlight the channel you want to delete and
press
on the keypad. If the channel is unlocked, a
confirmation box will appear to ensure that
you really want to delete the channel (select
"OK" or "Cancel"). If the channel is locked, a
confirmation box will appear to remind you
that the channel is currently locked and to ask if you are sure you want to delete
it ("OK" or "Cancel").
STEP 3
Copying a Channel
'
Deleting a Channel
'
Summary of Contents for VistaGRAPHX 2500
