User manual
15
End a program
It is possible to end a program after start.
Select
END PROGRAM
and activate.
When pressing
the program will be ended.
Status
Select
STATUS MENU
and activate.
The status menu shows the status for inlet air temp, outlet air temp, RMC and if the heat is on or off in the machine.
Change drum speed (only on machines with DCS)
Select
CHANGE DRUM SPEED
and activate.
Change the drum speed with the up- and down arrows and press
to activate.
Use the following table as a guide to set the optimum drum speed.
Optimum drum speed
Too fast drum speed
Too slow drum speed
5.4
When program has ended
Note!
For the best possible drying result it is important to empty the machine as soon as the program has ended.
If the machine is not emptied as soon as the program has ended the drum will rotate in short intervals in order to keep
the goods from being wrinkled.