44
User manual
10.8.1.8 EXTRACTION stage
Normal drain
The drain will be open. The motor may be at a standstill, on gentle action. During this time
the drum water will be discharged (1 = selected).
Optional drain
Actually out of service.
Extraction time
The period during which the drum is reaching its correct speed is not included in the extrac-
tion time (from 0 to 900 seconds).
Drum speed
Here you can determine the drum action during the time programmed for the spin cycle
(from 127 to 710 rpm).
Select the wished function by pressing this
�
or
�
keys.
Decrease or increase the value by pressing this (-) or (+) keys.
Then valid with
�
key.
10.8.1.9 END OF PROGRAM stage
The «End of program» stage is necessary to valid the created program.
Select
End of program
To valid, press the
Selection
key
10.8.1.10NUMERIC KEYBOARD menu
A numeric keyboard allows to give a program name (formed by letters).
Each of the numeric keys gives access to several characters as follows.
1 = abc ; 2 = def ; 3 = ghi ; 4 = jkl ; 5 = mno ; 6 = pqr ; 7 = stu ; 8 = vwx ; 9 = yz & 0.
The first time you press a given key, the first character available through that key will appear on the display. One
press on 1 produces A. One press on 2 produces D.
Simply press the relevant key the required number of times until the character you want appears on the display. For
example, to insert the letter C, press key 1 three times. To insert F, press 2 three times.
When the character you want is on the display, wait a moment the cursor sets after.
Compose your program name with the numeric keys, by pressing 1, 2 or 3 times on each key.
You can correct a bad capture by pressing this key
�
.
Then valid with
�
key.
Summary of Contents for WH5 500H
Page 2: ......
Page 55: ......
Page 56: ...Electrolux Professional AB 341 80 Ljungby Sweden www electroluxprofessional com ...
