50
User manual
11.2
LOADING DOOR
OPENED
UNLOADING DOOR
OPENED
This error code can only
arise during an on-going
program.
• Door unlocked.
• Test whether door really locked.
• Switch off power to machine. Wait a minute or
so, switch on power supply, open and close
door again and try restarting.
11.3
DOOR UNLOCKED
This error code can arise
at program start. If the
door lock doesn't lock
within a certain time after
program start, this error
code will be displayed.
• Door position acknowledgement not received
in time.
• This error code will also be displayed if the
door switch for locked door signals that the
door has been unlocked during an on-going
program.
• Open or close the door.
11.10
DRAIN DEFAULT
This error code is dis-
played if the water in the
drum is not below a pre-
determined level when a
drain period has been
completed in the program.
• This error code can be caused by for example
a blocked drain, blocked level hose, a water
drop in the level hose, defective level control,
restricted drain lines to the machine, too many
machines emptying simultaneously into drain
pipes that are too narrow, etc.
• Check the drain installation and that the waste
water can flow freely out from the machine
without any restrictions.
• Check the drain valve in the machine with re-
gard to dirt.
For other error codes or repeated error codes, disconnect the power for 30 seconds. If the error code keeps coming
back, contact authorized service personnel.
Summary of Contents for WH5 500H
Page 2: ......
Page 55: ......
Page 56: ...Electrolux Professional AB 341 80 Ljungby Sweden www electroluxprofessional com ...