Electrolux Professional WHB5 500H User Manual Download | Manualshive

Page: 25 / 36

background image

User manual

25

10 Additional functions

Note!

Some of the functions may not be available or active on your machine.

Pause

It is possible to pause an ongoing program.
Press the control knob. A menu will appear on the display. Select

PAUSE

by turning the control knob and press the

control knob to activate.
When pressing the control knob again the program will continue.
The door can be opened after a short while if the water level is not too high. Close the door and press the control
knob to continue.

Changing a program after start

It is possible to change a program after start.
Press the control knob. A menu will appear on the display. Select

CHANGE PROGRAM

by turning the control knob and

press the control knob to activate.
When pressing the control knob the program menu will be displayed. Select a new program and start by pressing the
control knob.

Rapid advance

If the machine has this function, it is possible to rapid advance an ongoing program.
Press the control knob. A menu will appear on the display. Select

RAPID ADVANCE

by turning the control knob and

press the control knob to activate.
When pressing the control knob a list with all program steps will be displayed. Select desired program step from the
list by turning the control knob and press the control knob to activate.

End a program

It is possible to end a program after start.
Press the control knob. A menu will appear on the display. Select

END PROGRAM

by turning the control knob and

press the control knob to activate.
When pressing the control knob the program will be ended. When the water is drained the door will be unlocked.

Delayed start

At the beginning of start program, it is possible to delay the start of the program.
After program selection, press the control knob. A menu will appear on the display. Turn the control knob to activate
the function. Set the time for the delayed start with the control knob.
Press the control knob to confirm the settings.

Status

Press the control knob. A menu will appear on the display. Select

STATUS MENU

by turning the control knob and

press the control knob to activate.
The status menu shows the status for water temperature, water level and drum speed for the machine.

Statistics

Press the control knob. A menu will appear on the display. Select

STATISTICS

by turning the control knob and press

the control knob to activate.
The statistics menu shows total run hours and trip run hours for the machine.

Auto restarts

Press the control knob. A menu will appear on the display. Select

AUTO RESTARTS

by turning the control knob and

press the control knob to activate.
Set the number of automatic restarts that the machine will perform of the selected program.
Press the control knob to confirm the settings.

«
...
23
24
25
26
27
...
»

Summary of Contents for WHB5 500H





































Reviews:

No comments

Related manuals for WHB5 500H

Brand: Nilfisk-Advance Pages: 213

HYDRO-FORCE MX200M

Brand: Nautilus Pages: 93

Brand: i-team Pages: 20

Brand: Record Power Pages: 16

Brand: lavina Pages: 13

Powr-Flite PAS32SHP

Brand: Tacony Pages: 15

Brand: Axminster Pages: 30

TD-MIXVENT TD-4000/355

Brand: S&P Pages: 16

Brand: Tennant Pages: 2

Brand: Tennant Pages: 178

Brand: Plymovent Pages: 20

Brand: Plymovent Pages: 36

Brand: PowerPoint Pages: 12

Round 45 Touch 45D55

Brand: Ghibli & Wirbel Pages: 32

Brand: Fumex Pages: 20

VACU MATIC FREE

Brand: ADVANCE Easy Moving Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands