Electrolux Blast Freezers
Blast Chiller/ Freezer - 56 kg 10 GN2/1
Internet: http://www.electrolux.com/foodservice
HDBA040
2011-06-10
Subject to change without notice
SLIDE-IN RACK SUPP. BC+BCF 56KG 10 GN2/1
880075
PRINTER HACCP BASIC VERS-REF.ELECR.CONTR
881532
PLASTIFIED GRILL RILSAN GN 2/1
881030
PLASTIC COATED GRID-600X400 MM
880864
KIT TO CONVERT TO 10X2/1 ROLL-IN RACK
922202
KIT HACCP ADVANCED CONNECT. BC/BCF LW+CW
880183
80 MM PITCH SIDE HANGERS FOR 10X2/1 OVEN
922117
60 MM PITCH SIDE HANGERS FOR 10X2/1 OVEN
922123
4 WHEELS FOR BLAST CHILLERS
881097
3-POINT-SENSOR PROBE-BL.C/FREEZERS LW
880212
ACCESSORIES
1 SINGLE-SENSOR PROBE-BL.C/FREEZERS LW
1
INCLUDED ACCESSORIES
Power supply - V, phases, Hz
400 V, 3N, 50
Net weight - kg.
235
installed-electric
2.88
Power - kW
at evaporation temperature - °C
-30
Refrigerant power
Refrigeration power - W
2540
Refrigerant quantity - g.
3170
Refrigerant type
R404a
N° defrost in 24 hrs.
3/30'
Compressor power - HP
3
Max load capacity - trays h 65 mm - n°
6
Trays type
GN 2/1; 600x800
Door hinges
Right Side
height
1640
depth/with open doors
1010, 1755
width
1000
External dimensions - mm
Cooling unit
Built-In
Gross capacity (D.I.N. 8952) - l.
560
UK Guide lines - chilling / freezing
64, 56
NF Regulations - chilling / freezing
43.2, 43.2
Productivity per cycle - kg.
Power supply
Electric
TECHNICAL DATA
RBC102
726046
CONSTRUCTION
•
Internal and external finishing in 304
AISI stainless steel and backpanel in
galvanized steel.
•
High density polyurethane
insulation, 60 mm tickness, HCFC
free.
•
Environmentally friendly: R404a as
refrigerant fluid.
•
Developed and produced in ISO
9001 and ISO 14001 certified factory.
•
Inner cell with fully rounded corners.
•
Door equipped with removable
magnetic gasket with hygienic design.
•
Motors and fan waterproof
protected IP23.
•
Evaporator with antirust protection.
•
Ventilator (fan) swinging hinged
panel for access to the evaporator for
cleaning.
•
Automatic heated door frame.
•
Thermostatic expansion valve to
optimize the cooling unit efficiency.
•
Adjustable feet 150 mm high.
•
Stand alone printer as accessory.
•
PC connection on request, gate RS
485.
INSTALLATION
•
No water connections required.
•
Waste water can be plumbed into
drain, but can also be collected in an
optional waste container.
