Electrolux 102 D, Use And Care Manual

21

a. Helpful Hints

• We recommend that you buy kitchen equipment which is dishwasher safe.

• Using your dishwasher over a long time may discolour or fade some types of 

dishes (e.g. ones with the pattern on top of the glaze) and aluminium saucepans.

• If you often wash lead crystal glass, they will become opaque (not clear).

• If you take more than one day to fill the dishwasher, rinse your dishes by using 

the “Rinse” program at the end of the first day.

• Do not use steel wool, aerosol or solvent cleaners on any part of your dishwasher.

• Do not use lumpy or stale detergent. It will give you a poor wash.

• If you do not intend using your dishwasher for several weeks:

1.   open the door a little
2.   switch off the power
3.   turn off the water supply.

b. Problem Solving

Please refer to your Warranty card for a full description of problems and Solutions

For the 302 and 403 models, if your dishwasher stops during a cycle, a fault condition
will be indicated on the display and the controller will “beep” every two seconds. 
Once the fault has been rectified, press the ON/OFF button. The wash program
will continue.

FAULT

BEEPER

DISPLAY

WHAT TO DO

Not filling

Repeating single beep

“

I 10

” Displayed

Check water supply and tap.
Check inlet hose filter.

Not Draining

Repeating double beep

“

I20

” Displayed

Check drain hose for kinks.
Check sink trap spigot for blockage.
Check filters and clean if dirty.

Overfill

Repeating triple beep

“

I30

” Displayed

Turn off water tap and power.
Call service.

Electrical Fault

Repeating 5 beeps

“

I50

” Displayed

Turn off water tap and power.
Call service.

Section E:  

Help Guide