Electrolux 236200, Installation And Operation Instructions Manual

 43

5958 962 00

GB

5954 00U 01

4.4 MANUAL

After SWITCHING THE OVEN ON  the following MANUAL cooking 

mode screen appears:
 

Drop-down "CONTROLS MENU":

 Manual          



 Programs        

 Cleaning  

 Settings  

Manual

Phase

1 of 1

48°

0:30

0:30

START

3

Cooking PHASES (1 of 1)

 Cooking 

CYCLES

Set HUMIDIFICATION

              
 Set

TEMPERATURE

 Current 

TIME

 Set 

TIME

 Start 

CYCLE

 INFORMATION 

AREA

  "DRAWER" 

drop-down 

menu 

       with Utilities in several items of the CONTROLS MENU

To set a cooking cycle, select the required CYCLE:

HOT AIR   

(touch)

and set:

- HUMIDIFICATION  

(touch CYCLE button)

- TEMPERATURE  

(touch the bar 

 )

- 

TIME 

  (touch 

the 

bar 

 )

  or CORE PROBE 

(touch the bar 

 and then 

 ) 

  When the 

fi

 rst cooking phase is set with core probe, it will last        

  at least one minute.

In this way a cooking cycle has been set; now, just close the door 

and touch START to start the Cycle. 

The PREHEATING stage starts, after which the message "LOAD" 

appears, indicating to place food in the oven; close the door to 

start cooking.

In case of AUTOMATIC START, just close the door to automati-

cally start the cycle.

After about 10 seconds the following Cooking in Progress screen 

will appear:

Convection

160°
2:17

2:30

Phase  2/3

3

Cooking PHASE (2 of 3)

Hot Air cycle * in progress

HUMIDIFICATION in progress  

Set TEMPERATURE 

 TIME 

in 

progress 

 set 

TIME

HALF SPEED in progress 

 (example)

* In PROGRAMMED mode, the word "Convection" will be replaced 

by the name of the Program or Recipe in progress (e.g. Chicken)

This 

fi

 gure (for information) shows nearly all the possible cases; 

but only those concerned are presented

.

Touch this screen to return to the MANUAL control Settings. 

Any setting already made can be modi

fi

 ed and the Cooking Cycle 

can be stopped by touching STOP for a few seconds.
The SKIP COMPARTMENT PREHEATING function also appears 
with the respective symbol 

 next to the STOP button, to skip 

preheating for particular types of cooking.

       STOP

The previous description regarded setting a cooking Cycle. Now, 

this will enable setting others in a more complex way, by adding 

the other functions made available.