44
5954 00U 01
GB
To add more functions, there are the UTILITIES situated in the
DRAWER and selected as cooking cycle variables.
DRAWER open
UTILITIES
INFORMATION
real
data
E.g. In the HOT AIR cycle, as indicated in the previous table, it
is possible to set the Humidi
fi
cation, Temperature, Time or Core
Probe, and Temperature with Eco Delta, compartment Cooling,
endless Time for continuous Cooking (conventional cooking) and
Short Cooking Cycles (MM:SS).
To set the data of the various functions, a keypad like the following
is used:
To zero-set the value just entered, touch the
0 on the keypad.
If a function (e.g. Eco Delta
) has been
set on the keypad, to cancel it just touch the
same button again.
To return to the initial setting, select another
cycle and return to the same.
Cooling: it is possible to set an oven
compartment cooling temperature to be
reached, which will be indicated with the
corresponding symbol on the cooking in
progress screen.
Compartment cooling therefore occurs
manually and is done outside the cooking
cycle.
cycle
HOT
AIR
HUMIDIFICATION TEMPERATURE
TIME
CORE
PROBE
adjustable
x(
)
x
x (max. 8 hours) x (from 10° to 99°)
---->
compartment vent open x - - -
---->
compartment
vent
closed
x - - -
---->
Eco Delta *
-
x (from 20° to 120°)
-
-
---->
endless
- - x -
---->
MM:SS
(short cooking cycles)
- - max. 59 min. and 59 sec. -
The functions in MANUAL Cooking mode are as follows:
*
Eco Delta: on setting the temperature range, a small
triangle will appear as a reference next to the value; also, the
time bar goes to that of the core probe
for the relevant setting.
Summary of Contents for 236200
Page 24: ...54 5954 00U 01 GB ...