10
Reversing the Door
NOTE
Be sure character side of reed switch
fits well with coping block.
16 Install the upper hinge cover (which is
in the plastic bag).
Upper Hinge
Cover (Left)
17 Reverse part
①
and install it onto the
right corner of upper door.
1
18 Take the reed switch out of the
coping block (parts
③
and
⑥
in step
3) and mount it on another block
for use (which is marked “R” in the
plastic bag). Put the coping block just
removed back into the plastic bag.
19 Install part
①
, connect the wire
connector
②
, and then install part
③
.
1
1
3
2
20 Open the upper door, mount door
racks and then close the door.