Electrolux 242232501, Use And Care Manual

7

To reverse the door:

  1  Stand the refrigerator upright. Open 

the upper door. Take out all door 

racks (to avoid damaging the racks) 

and then close the door.

Reversing the Door

Door Reversal

The side on which the door opens can be 

changed from the right side (as supplied) to 

the left side if the installation site allows.

CAUTION

Be sure doors are set aside in a 

secure position where they cannot 

fall and cause personal injury, or 

damage to the doors or handles.

  3  Remove the corner cover.

8 mm socket driver

Phillips screwdriver

Putty knife or thin-blade screwdriver

8 mm wrench

Door

Racks

  2  Open upper cover 

①

 on top of the 

refrigerator body from right side and 

then remove the upper hinge cover 

②

 and magnetic switch box 

③

.

1

2

3

Magnetic 

Switch Box

Upper Cover
Upper Hinge 

Cover (Right)

1

2

3

  4  Remove the screws 

①

, and remove 

part 

②

.

Special Flange

Self-tapping

Screws

Part

1

2

WARNING

When reversing the door, the appliance 

must not be connected to the power 

source. Ensure that the plug is 

removed from the power source.

Tools you will need:

NOTE

Before you start, lay the refrigerator on its 

back in order to gain access to the base. 

You should rest it on soft foam packaging 

or similar material to avoid damaging the 

backboard of the refrigerator.