Electrolux 242232501, Use And Care Manual

9

Reversing the Door

  9  Place refrigerator flatwise, remove 

part 

③

 and then loose screws 

④

. 

Remove part 

②

 and part 

①

.

Note:

Washer may 

stick to the 

lower door.

Washer

1

2
3
4

Lower Hinge Part 

(Right) 

Front Foot Fixed Board

Adjustable Bottom Feet 

Part Self-tapping Screws

1

2
3
4

 10  Screw out lower hinge, change it to 

the near hole site, and then screw up 

and mount washer.

 11  Just remount to the step 9, change 

part 

①

 to left and part 

②

 to right and 

then fix them with screws 

④

. Finally 

install part 

③

.

Lower hinge

part (left)

 12  Move the lower door and adjust its 

position to align lower hole site and 

upper hinge axis. Turn the middle 

hinge by 180 degrees, change the 

washer on the axis to the upper 

side, adjust the middle hinge to the 

appropriate position and then install 

it.

Note:

Washer may stick to

lower door.

Washer

 13  Screw out the upper hinge axis, turn 

the upper hinge over and fix axis on 

it. Then place it at side for use.

 14  Exchange wires both in the left and 

right slots of refrigerator body.

 15  Move the upper door to appropriate 

position, adjust part 

①

 and upper 

door, then fix part 

①

 by screws 

②

. 

(Please hold upper door by hand 

when installing.)

1

2