62
Temperature Display - Fahrenheit or Celcius:
The oven control can be programmed to display
temperatures in Fahrenheit or Celsius. The range has
been preset at the factory to display in Fahrenheit.
To change from Fahrenheit to Celsius or Celsius to
Fahrenheit:
1. Identify which display the control is set for now. To
tell if the range is set for Fahrenheit or Celsius press
Broil
and hold for 7 seconds. A beep will then sound.
If “
F
” appears, the display is set to show
temperatures in Fahrenheit. If “
C
” appears, the
display is set to show temperatures in Celsius.
2. Press
Clean
to toggle between the Fahrenheit to
Celsius display mode. The display will show either
“
F
” or “
C
”.
3. Press
Start
to accept the change or press
Clear
Off
to reject the change.
Silent Control Operation:
The silent operation feature allows the control to be
operated without sounds or beeps whenever necessary.
If desired the control can be programmed for silent
operation and later returned to operating with all the normal
sounds and beeps.
To change control from normal sound operation to
silent control operation:
1. Identify which sound operation the control is set for
now. To tell if the range is set for normal or silent
operation press and hold
Stop Time
for 7 seconds.
“
DELAY
” will flash in the display. If “
:SP
” appears,
the control will operate with normal sounds and
beeps. If “
:—
” appears, the control is in the silent
operation mode.
2. Press
Clean
to toggle between the normal sound
operation and silent operation mode. The display
will show either “
:SP
” or “
:—
”.
3. Press
Start
to accept the change or press
Clear
Off
to reject the change.
Preheat:
This Preheat mode will bring the oven up to temperature
and then beep to know when to add food. Preheating the
oven is recommended when baking breads and cakes.
Use this mode when recipes call for preheating.
To Set the Minute Timer:
1. Press
Timer On/Off ,
“
0:00
” and “
TIMER
” will flash
in the display.
2. Push the number pads to set the desired time in the
display. Press
Start
, the time will begin to count
down and “
TIMER
” will glow in the display. Note: If
Start
is not pressed the timer will return to the time
of day.
3. When the set time has run out, “
END
” will show in
the display and 3 beeps, every 60 seconds, will
sound until
Timer On/Off
is pressed.
To Change the Minute Timer while it is in use:
1. Press
Timer On/Off
and enter the new time using
the number pads then press
Start
to start with the
new time.
To Cancel the Minute Timer before the set time has
run out:
1. Press and hold
Timer On/Off
. The display will return
to the time of day.
Oven Lockout Feature:
The Oven Lockout feature prevents the oven from being
accidentally turned on. It does not disable the clock,
minute timer, or surface elements (or) burners. It disables
the oven light switch, but the oven light will turn on if the
oven door is opened.
To activate the Oven Lockout:
1. Press and hold
Lock
for three seconds.
2. After 3 seconds the lock icon light will come on and
“
DOOR LOCKED
” will flash in the display. Once the
oven door is locked the “
DOOR LOCKED
” indicator
will quit flashing and remain on along with the lock
icon light.
To reactivate Oven operation:
1. Press and hold
Lock
for three seconds. A beep will
sound and the lock icon light will clear and the time
of day will be shown. The “
DOOR LOCKED
” will
continue to flash until the oven door has completely
unlocked.
2. The oven control may then be programmed for all
operations.
Summary of Contents for 30" GAS FREESTANDING RANGES
