HOW TO ASSEMBLE AND USE
1. After having taken the appliance out of its box, screw the telescopic tube onto the main part of
the appliance (Fig. 1). Then turn the two ends and pull them out to the desired length. Lock in the
upper part by turning clockwise (Fig. 1a).
Do not plug unit into an electrical outlet until Step 5.
INSTRUCTIONS FOR USE
The Electrolux Enviro Steamer is designed to thoroughly clean floor surfaces, such as marble, ceramic,
stone, linoleum, sealed hard wood floors and parquet.
WARNING: On surfaces that have been treated with wax, the wax may be removed by the
heat and steam action. Do not use on unsealed wood floors or let unit stand on
any wood floor for an extended period of time. This could cause the woodgrain
to rise. It is therefore recommended that a sample cleansing be carried out on an
isolated area of the floor. Also, check use and care instructions from the floor
manufacturer.
2. Secure the cable onto its hook at the top of the tube (Fig. 2).
Fig. 1
Fig. 1a
Fig. 2a
Fig. 2
