8
8
8
8
8
Examples of possible ducting
Examples of possible ducting
Examples of possible ducting
Examples of possible ducting
Examples of possible ducting
Horizontal discharge
Horizontal discharge
Horizontal discharge
Horizontal discharge
Horizontal discharge
V
V
V
V
Vertical discharge
ertical discharge
ertical discharge
ertical discharge
ertical discharge
Recir
Recir
Recir
Recir
Recirculating
culating
culating
culating
culating
Installing the hood
Ductwork installation guidelines
For safety reasons, ducting should vent directly
outdoors (not into an attic, underneath the house,
into the garage or into any enclosed space).
Keep duct runs as short and straight as possible.
Duct fittings (elbows and transitions) reduce air flow
efficiency.
Back to back elbows and „S“ turns give very poor
delivery and are not recommended.
A short straight length of duct at the inlet of the
remote blower gives the best delivery.
Transition to duct from the integral blower or remote
duct transition as close to the downdraft as is pos-
sible.
In order of preference, use
1st. 10" round duct
2nd. 8" round duct
3rd. 3-1/4" x 14" duct
4th. 7" round duct
5th. 3-1/4" x l0" duct
6th. 6" round duct
The use of flexible metal round duct should only be
used when no other duct fitting exists. Limit use to
short lengths and do not crush when making
corners.
After having choosen the vent option
After having choosen the vent option
After having choosen the vent option
After having choosen the vent option
After having choosen the vent option, proceed as
follows:
Step 2
Step 2
Step 2
Step 2
Step 2
Remove the round transition from its seat by
unscrewing the its fixing screws (save the screws).
7" Round
Transition
Step 3
Step 3
Step 3
Step 3
Step 3
Remove the grease filters.
