10
Electrolux
800 Series Coffee Grinders
Troubleshooting Guide
Before you call for help, please read the following:
Problem
Possible Cause
Solution
Grinder will not start when
Bag not under spout.
Place bag underneath spout.
START button is pushed
Plug not in outlet properly.
Install plug in outlet.
No power to outlet.
Check outlet with lamp or radio to verify
outlet has power.
Grinder runs or hums but no
Circuit breaker has tripped.
Reset circuit breaker by pushing in reset
coffee is dispensed
button until you hear a click.
Shear disc is broken.
Replace shear disc. See
Shear Disc
Replacement
or instructions on back of
grinder.
Obstruction in opening to grinding
Unplug unit. Empty beans out of hopper
chamber.
and clear obstructions. See
Shear Disc
Replacement
for disassembly and
assembly instructions.
Excessive amount of coffee
Defective chaff mixer spring.
If bent, broken, or missing, replace spring.
chaff flying about
If stuck open with coffee, clean out coffee
to free spring.
Outlet not properly grounded.
Check power cord end and outlet for
proper ground.
Static electricity.
Tighten all nuts, bolts, and screws and
verify outlet is grounded.
Circuit breaker continuously
Insufficient amperage due to use of
Plug unit directly into outlet. Do not use.
trips
extension cord.
extension cord.
Insufficient amperage due to
Designate single line for grinder. Do not
overloaded line.
use multi-outlet box.
Grind setting needs adjustment.
Adjust grind to coarser setting (see
Grind
Adjustment
).
WARNING: ELECTRIC SHOCK HAZARD!
Unplug power cord from outlet before cleaning or
servicing your grinder.
