led indicators are located on the
edge of the circuit board (note: the
cover has been removed from the
electrical control box for illustration
purposes)
running time adjustment
a)
left (no1) potentiometer adjusts
machine running time from 30 & 240
seconds
b)
right (no2) potentiometer adjusts
pump running time from 1 to 30
seconds
Fuses ensure replacement fuses
are of correct rating
motor protectors
left – disposer
center – press (dehydrator)
right – pump motor
D3 WARNING MESSAGE : ELECTRICAL CONTROL BOX WARNING LIGHTS
Note - The LED indicators are numbered from left to right
LAMP
No
CHARACTERISTIC MEANING
1
POWER SUPPLY
LIT WHEN POWER IS ON
2
OPTIONAL LED
NOT USED ON SOME MODELS
3
DISPOSER CONTROL LED
LIT WHEN DISPOSER IS RUNNING
4
PRESS CONTROL LED
LIT WHEN PRESS IS RUNNING
5
PUMP CONTROL LED
LIT WHEN PUMP IS RUNNING
6
LID SENSOR 1 LEFT SENSOR LED
LIT WHEN LID IS CLOSED
7
LID SENSOR 2 RIGHT LED
LIT WHEN LID IS CLOSED
8
STOP SWITCH LED
LIT WHEN SWITCH IS PRESSED
9
START SWITCH LED
LIT WHEN SWITCH IS PRESSED
10
PUMP MOTOR START LED
LIT WHEN MOTOR IS RUNNING
11
PRESS MOTOR START LED
LIT WHEN MOTOR IS RUNNING
12
DISPOSER MOTOR START LED
LIT WHEN MOTOR IS RUNNING
13
WATER VALVE V2 HOT TO PRESS LED
LIT WHEN VALVE OPEN
14
WATER VALVE V1 HOT TO SHOWER LED
LIT WHEN VALVE OPEN
15
CONTROL ERROR LED
LIT WHEN MACHINE FAULT (ALSO
LIGHT ON START/STOP WILL BE
ON – IF NOT BULB FAILED)
16
CPU ERROR (RED) LED
LIT WHEN FAULT IN CONTROL
BOARD
Page 18 of 20
