18
3
Fitting the hob to the worktop
Before fitting the hob into the cut out, a
sealing gasket supplied with the hob must
be fitted to the edge of the cut out. It is
essential that no gaps are left in this seal
in order to prevent spillage near the hob
seeping into the cabinet below.
1) Place the sealing gasket all around the
edge of the cut out.
2) Place the hob into the cut out and secure
it by means of the relevant fixing clamps
and screws, as shown in the diagram.
3) Remove the excess seal
The edge of the hob forms a double seal
which prevents the ingress of liquids.
Seal
Building In