Electrolux 943005440, User Manual

zone. The display shows the heat setting
( ).

6.6 The heat setting

Set the cooking zone.

Touch   to increase the heat setting.
Touch   to decrease the heat setting.
Touch   and   at the same time to

deactivate the cooking zone.

6.7 Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time.

The function sets the highest heat setting

for some time and then decreases to the

correct heat setting.
To activate the function for a cooking
zone: select the cooking zone. Touch 
and   at the same time.   comes on.
Touch   again.   comes on. Select the

correct heat setting within 3 seconds.
After 5 seconds   comes on again.

Zone is running with the heat setting 9.

After some time zone sets back to

selected heat setting

To deactivate the function: touch  .

6.8 PowerBoost

This function makes more power

available to the induction cooking zones.

The function can be activated for the

induction cooking zone only for a limited

period of time. After this time the

induction cooking zone automatically

sets back to the highest heat setting.
To activate the function for a cooking

zone: first set the cooking zone and than
set the maximum heat setting. Touch 
until   comes on.

To deactivate the function: touch  .

6.9 STOP+GO

This function sets all cooking zones that

operate to the lowest heat setting.
When the function operates, you cannot

change the heat setting.

To activate the function: touch  . 

comes on.

To deactivate the function: touch  .

The previous heat setting comes on.

6.10 OffSound Control

(Deactivation and activation of

the sounds)

Deactivate the hob. Touch   for 3
seconds. Touch   for 3 seconds. On the
left front zone display   comes on and
on the right front zone display   or 

comes on. Touch sensor field for the
right rear zone 

 to choose one of the

following:
•

 - the sounds are off

•

 - the sounds are on

When the function is set to   you can

hear the sounds only when:
• you touch 

• there is an error in the hob.

6.11 Power management

function

• Cooking zones are grouped according

to the location and number of phases

in the hob. See the illustration.

• Each phase has a maximum

electricity load.

• The function divides the power

between cooking zones connected to

the same phase.

• The function activates when the total

electricity load of the cooking zones

connected to a single phase is

exceeded.

• The function reduces the power of the

other cooking zones connected to the

same phase.

• The heat setting display of the

reduced zones changes between two

levels.

ENGLISH

13