background image

– All the programme lights come on,
– The programme in progress indicator

light goes off.

2. Release function buttons B and C to can-

cel the washing programme.

At this time you can do these steps:
1. Switch off the appliance.
2. Set a new washing programme .
Fill the detergent dispenser with detergent
before you set a new washing programme.

Setting and starting a washing
programme with delay start

1. Press the on/off button.
2. Set a washing programme.
3. Press the delay start button until the dis-

play shows on flashing the necessary de-
lay start of the washing programme.

4. Close the door.

– The number on the display comes on

with fixed light.

– The programme in progress indicator

light goes off.

– The countdown of the delay start

starts.

– The countdown of the delay start de-

creases with steps of 1 hour.

– When the countdown is completed,

the washing programme starts auto-
matically.
– The programme in progress indica-

tor light comes on.

Do not open the door during the count-
down to prevent interruption of the
countdown. When you close the door
again, the countdown continues from
the point of interruption.

Cancelling a delay start:

1. Press and hold function buttons B and C

until:

– All the programme lights come on
– The programme in progress indicator

light goes off.

When you cancel a delay start, you also
cancel the washing programme.

2. Set a new washing programme.

End of the washing programme

Switch off the appliance in these conditions:
• The appliance stops automatically.
• The display shows 0.
• The end of programme indicator light

comes on.

• The programme in progress indicator light

goes on.

1. Press the on/off button.
2. Open the door.
3. For better drying results, keep the door

ajar for some minutes before you remove
the dishes.

Let the dishes cool down before you remove
them from the appliance. Hot dishes are
easily damaged.

Standby mode

If you do not switch off the appliance at the
end of the washing programme, the appli-
ance automatically goes into standby mode.
The standby mode decreases energy con-
sumption.
Three minutes after the end of the pro-
gramme, all indicator lights go off and the
digital display shows one horizontal bar.
Press one of the buttons (not the on/off but-
ton), to go back to end-of-programme mode.

Removing the load

• First remove items from the lower basket,

then from the upper basket.

• There can be water on the sides and door

of the appliance. Stainless steel becomes
cool more quickly than the dishes.

Washing programmes

Washing programmes

Programme

Degree of soil

Type of load

Programme description

Intensif

Heavy soil

Crockery, cutlery, pots
and pans

Prewash
Main wash up to 70°C
2 intermediate rinses
Final rinse
Drying

electrolux 

 13

Summary of Contents for ASF65090





















Reviews: