SOI 02.10 FV
15/142
599 70 59-01
5. Glue and cut the double-sided adhesive tape at the bottom of the control panel support as at the
top (see Fig. 22).
Fig. 22
6. Remove the protective film from the double-sided tape positioned at the top and bottom of the
control panel support (see Fig. 23).
Fig. 23
7. Glue the front panel to the control panel support, making sure you position it correctly so that the
side edges of the front panel coincide with the control panel support (see Fig. 24).
Fig. 24
NOTE:
In the models with knobs and buttons, to facilitate the correct positioning of the positioning
of the front panel, it is possible to insert some of the knobs
and buttons, and these can
serve as a guide for positioning the front panel itself (see Fig. 25).
