electrolux
21
EN
Only place food inside the freezer
once the symbol (
) has gone. The
temperature of the freezer is set to
reach -18°C, which is the optimal
storage temperature as set in the Eco
Mode (
)
Switch on-off
Switch on the freezer
Press button (A) to switch the
appliance on.
The display comes on.
Switch off the freezer
Press button (A) for more than one
second until the countdown "3-2-1"
disappears and you hear a sequence
of beeps.
The display goes off.
Warning!
Do not place objects on the
control panel, as they might accidentally
switch off the freezer.
Daily use
Temperature adjustment
The temperature may be adjusted
between -15°C and -24°C. We suggest
setting the freezer tem+G41perature to -
18°C, which guarantees proper freezing
and conservation of frozen food.
Press button (B) several times until the
desired temperature is reached.
The temperature on the display
flashes and indicates the temperature
set.
Press button (E) to confirm the desired
temperature. You will hear a beep.
The temperature on the display stops
flashing again and indicates the
temperature inside the freezer.
The newly adjusted temperature is
reached after several hours. During
this time it is normal that the
temperature displayed is different from
the temperature set.
Attention!
Differences between the
temperature displayed and the
temperature set are normal, especially
when:
The temperature setting has recently
been adjusted.
The lid has been left open for a long
time.
Warm food has been placed in the
freezer.
The Super Freeze function is
activated.
Super Freeze function
If more than 3-4 kg of fresh food is to be
frozen, the freezer needs to be pre-
cooled.
At least 24 hours before placing fresh
food in the freezer, press button (D)
several times until the corresponding
symbol (
) flashes on the display.
Press button (E) within a few seconds
to confirm the Super Freeze
activation. The symbol (
) stops
flashing, you will hear a beep and the
animation on the display speeds up.
Place the food in the freezer. After 52
hours this function will automatically
stop and the freezer will return to
normal storage temperature. This
function can be de-activated at any
time by pressing button (D) until the
corresponding symbol (
) flashes on
the display again and then by pressing
button (E) to confirm the de-activation.
Summary of Contents for C 225
Page 2: ...We were thinking of you when we made this product ...
Page 51: ......
