40
Technical Specifications
Model
Dimensions
Lighting
Grease filter
Power
Electrical
Height Width Depth
absorption
connection
EFCL 650
55-64,5
59,9
51,5
2 x 40W
2
250 W
220-240 V
EFC650
87,5-111,6
59,9
51,5
2 x 40W
2
250 W
230 V
EFC950
87,5-111,6
89,9
51,5
2 x 40W
3
250 W
230 V
CH 1200
87,5-111,6
119,9
51,5
2 x 40W
4
250 W
230 V
CH900
87,5-111,6
89,9
51,5
2 x 40W
3
250 W
230 V
CH600
87,5-111,6
59,9
51,5
2 x 40W
2
250 W
230 V
Subject to change without notice.
What to do if
If your appliance fails to work properly please carry out the following checks.
Symptom
Solution
The cooker hood will not start...
Check that: The hood is connected to the electricity supply.
Check that a fan speed has been selected
The cooker hood is not working
Check that: The fan speed is set high enough for the task.
The grease filters are clean.
The kitchen is adequately vented to allow the entry of fresh air.
If set up for recirculation, check that the charcoal filter is still effective.
If set up for extraction, check that the ducting and outlets are not
blocked.
The cooker hood has
The safety cut-out device has been tripped.
switched off during operation...
Turn off the hob and then wait for the device to reset.
If the hood has been installed below the heights indicated in the
installation instructions the motor will cut-out frequently which will
damage the hood.
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and
serial number.
Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.
In-guarantee customers should ensure that the above checks have been made as the engineer will make a
charge if the fault is not a mechanical or electrical breakdown.
Special Accessories
Charcoal Filter Type 200
For all Models - Fuse rating:
5A Time Delay Fuse
