4. OPERATION
4.1 Control panel
1
2
3
4
5
1
Power indicator light
2
Temperature regulator
3
FastFreeze light
4
FastFreeze switch and alarm reset
switch
5
Alarm light
4.2 Switching on
1. Insert the plug into the wall socket.
2. Turn the Temperature regulator
clockwise to a medium setting.
The power indicator light will switch
on.
If the temperature inside the appliance is
too high the Alarm light will blink. Activate
the FastFreeze function.
4.3 Switching off
1. Turn the Temperature regulator to
the "O" position.
The power indicator light will switch
off.
2. Remove the plug from the wall
socket
4.4 Temperature regulation
The temperature is regulated
automatically.
1. Turn the Temperature regulator
toward lower settings to obtain the
minimum coldness.
2. Turn the Temperature regulator
toward higher settings to obtain the
maximum coldness.
A medium setting is
generally the most suitable.
However, the exact setting
should be chosen keeping in
mind that the temperature
inside the appliance
depends on:
• room temperature,
• how often the door is
opened,
• the quantity of food
stored,
• the location of the
appliance.
4.5 FastFreeze function
You can activate the FastFreeze function
by pressing the FastFreeze switch.
TheFastFreeze light will light up.
This function stops
automatically after 52 hours.
It is possible to deactivate
the function at any time by
pressing FastFreeze switch.
The FastFreeze light will
switch off.
4.6 Door open alarm
An acoustic alarm will sound when the
door is left open for around 80 seconds.
ENGLISH
7
Summary of Contents for CI8001
Page 63: ...ESPAÑOL 63 ...
