Electrolux CVE612, User Manual

pyrolytic cleaning

Pyrolytic Cleaning of the Oven Cavity  

(Pyrolytic models only)

The oven has a pyrolytic self-cleaning function. It cleans by 

burning off the spatters and accumulated dirt and grease 

from the oven liner, at high temperature. This process 

produces ash which can then be wiped out of the oven 

cavity. It is recommended you clean your oven regularly to 

keep the oven in its best condition.
•    Light clean - this is an energy saving cycle that can be 

used on a regular basis if the oven is lightly soiled. 

Possibly after every 2nd or 3rd roast.

•    Normal clean - use this as the regular cycle about once 

every 2-3 months.

Before carrying out the Pyrolytic cleaning function

WARNING

warning

•    Clean large deposits, spills or grease from the  

oven cavity.

•    Please keep small children at a safe distance. The 

appliance becomes very hot.

•    Never clean non-stick baking trays and tins in the oven 

during the pyrolytic cycle. High temperatures damage the 

non-stick coating and poisonous gas is released.

•    Pyrolitic cleaning can release fumes that are not harmful 

to humans, including infants or persons with medical 

conditions, however you are strongly advised to provide 

good ventilation during and after each pyrolytic cleaning 

process.

•    Unlike humans, some birds and reptiles can be extremely 

sensitive to the potential fumes emitted during the pyrolytic 

cleaning process. It is strongly advised to remove any pets 

(especially birds) from the vicinity of the appliance during 

and after each pyrolytic cleaning process.

•    Small pets can also be highly sensitive to the localized 

temperature changes in the vicinity of all pyrolytic ovens 

when the pyrolytic self cleaning program is in operation.

WARNING

caution

•    All accessories must be removed from the oven, including 

shelves, trays and side racks.

•    During pyrolytic cleaning the air outlet vent above the 

door must be kept clear of any obstruction (e.g. tea 

towels).

•    Do not use your oven to clean miscellaneous items (e.g. 

cookware).

•    To prevent damage, do not use acids, sprays or similar 

cleaning agents.

TIPS & INFORMATION

important

During the pyrolytic cleaning function, it is advisable not to 

use a cooktop if it is fitted above the oven. This could cause 

overheating and damage to both appliances. The cooling 

fan will operate at an increased speed for Pyrolytic cleaning 

and will continue to run until the oven has cooled down. It is 

recommended to use the Pyro clean function regularly to keep 

the oven in its best condition.

Starting the Pyrolytic cleaning function  

•    Turn the oven “Function” selector clockwise to select the 

“Pyro” function.

•    Use the 

+

 or 

–

 buttons on the electronic clock to select 

between a pyrolytic cleaning time of 1:30 hours (light 

clean) or 2:30 hours (normal clean) for the appropriate 

level of cleaning required. 

•    After 5 seconds from the last change, the oven  

will begin heating and the “Remaining time” will  

be displayed.

•    The pyrolytic cleaning function can be stopped at any 

time during the cycle by turning the function selector 

counter-clockwise to the “OFF” position.

During Pyrolytic cleaning

When the temperature in the oven approaches 300

o

C the 

door will automatically lock and a padlock symbol will 

appear on the display.

After Pyrolytic cleaning

The door will only unlock when the oven has cooled to a safe 

temperature. Turning the function off will not unlock the door.
After cool-down, wipe the ash out of the oven with a soft 

damp cloth and warm water. To restore the enamel shine 

to more difficult areas, use a damp cloth with vinegar and 

detergent.

Note: The “Remaining time” does not include cool-down time 

for the oven. 

30  PYROLYTIC CLEANING  Built-in Cooking