background image

www.electroluxaircomfort.com  9

CLEANING AND 
MAINTENANCE

WARNING

•  Before cleaning and maintenance, 

disconnect the unit from the power supply.

•  Do not immerse the unit in water or other 

liquids. If the unit is immersed in water or 
other liquids, do not remove the unit with 
your hands. Immediately disconnect the 
unit from the power supply. If the unit is 
immersed in water or other liquids, do not 
use the unit again.

•  Do not splash water on the unit to prevent 

electric shock. 

CAUTION

•  Do not use aggressive liquids (e.g. thinner 

or gasoline) to clean the unit. Clean the 
unit using a soft, dry cloth or a cloth slightly 
moistened with water or cleaner.

Cleaning the front panel

1.  Remove the front panel.
2.  Clean the front panel using a cloth slightly 

moistened with water.

3.  Install the front panel.

Cleaning the air fi lter

The air fi lter must be cleaned every 3 months.

WARNING

•  Do not touch the fi n of the indoor unit to 

prevent personal injury. 

CAUTION

•  Do not use water above 45 °C to clean 

the air fi lter to prevent deformation or 
discolouration.

1.  Open the front panel.
2.  Remove the air fi lter.
3.  Remove dust from the air fi lter using a 

vacuum cleaner.

4.  If the air fi lter is dirty, clean the air fi lter with 

warm water and a mild detergent. Allow the 
air fi lter to dry naturally in a cool, dark place.

5.  Install the air fi lter.
6.  Close the front panel.

Check before use

•  Make sure that nothing obstructs the air inlet 

or the air outlet.

•  Make sure that the installation stand of 

the outdoor unit is not damaged. If the 
installation stand is damaged, consult a 
qualifi ed technician.

•  Make sure that the batteries are inserted into 

the remote control.

Maintenance after use

•  Disconnect the unit from the power supply.
•  Clean the fi lters and the housings of the 

indoor unit and the outdoor unit.

•  Remove any obstructions from the outdoor 

unit.

Summary of Contents for CXH09HL1W





















Reviews: