SOI/TD 2005-2 PR
/26
599 36 83-66
8
5 SEQUENCE OF OPERATION
1. Switch on the appliance with button
S0
the “End of cycle” LED flashes every
2sec for 0.5sec.
eventually, if featured, the Salt/Rinse
aid LEDs light up.
2. Select the delayed start or the desired
option (if featured) pressing button
S1
.
the LED
LD1
lights up.
3. Select the desired programme pressing
sequentially button
S2
.
the relative LED lights up.
SELECTING THE
CY
CLE
4. If
LD2
flashes, there is an alarm condition
press button
S2
to try and solve the
problem: if it is not ok
LD2
will flash
again; consult the “Alarm” table for the
codification.
START
5. Close the door
The cycle starts automatically after
3sec or at the end of the countdown (if
the delayed start has been selected)
EXECUTIO
N
OF CYCLE
6. To interrupt a programme in progress:
Open the door carefully.
To restart the cycle, close the door.
NB: Switching the appliance off and on, the
programme restarts from the point at which it
was interrupted.
C
ANC
ELLING
THE CY
CLE
7. To cancel a programme in progress:
Open the door and press button
S2
for
about 3 seconds.
The LEDs
LD7 – 8 – 9
light up (if
featured).
The
LD1 – 2
LEDs switch off and the
previous settings are cancelled.
END
8. At the end of the programme:
the buzzer emits a sound sequence.
The LED of the programme, the End of
cycle LED and the Salt/Rinse aid LEDs are
on, if featured.
9. Press
button
S0
to switch off the
appliance.
All LEDs switch off.
3 sec
