background image

19

Storage Features

Special items rack (select models)

The innovative design of the special items rack allows 
you to store four (4) bottles of wine or soft drink bottles. 

Removing Crisper Drawer

To remove the Crisper Drawer for cleaning:

 

1  Pull the drawer out until it stops.

 

2  Lift the front slightly and remove the drawer.

Deli keeper (select models)

Some models are equipped with a meat keeper drawer 
for short-term storage of bulk meat items. This drawer 
includes sliding controls for adjusting the humidity 
inside. 

Any meat to be kept longer than two (2) days should be 
frozen. If you store fruits or vegetables in this drawer, 
set it to a higher humidity.

The Custom Temp

TM

 Drawer is designed to keep food items at a precise temperature whether cooler, warmer, or 

the same as the fresh food section of the refrigerator.  The thaw setting holds a temperature for thawing frozen 
foods for 12 hours.  At the end of that time, it then switches to the mixed items setting to store the thawed food.

Custom Temp

TM

 Drawer (select models)

To operate:

 

1  To turn on and off, press the drawer’s On/Off 

button.  The numeric display will show a temperature 
between “

28°F and 42°F” when on and “OFF” when 

off.

 

2  Press F/C if you prefer to display Fahrenheit “F,” 

or Celsius “

C”.

 

3  Press either the up 

 or down 

 scroll buttons to 

illuminate the desired item.

 

4  Once an option is selected, the drawer will adjust 

and maintain the temperature for the setting 
selected.

 

5  When turned off, the Custom Temp

TM

 Drawer 

functions as a standard meat pan.  The Custom 
Temp

TM

 Drawer is best used for packaged food 

products.  Leafy vegetables and unpackaged 
fruits are best kept in one of the crisper drawers.

 

6  The three favorite selections provide flexibility to 

Opening the Drawer

set and store personal temperature selections.  
The temperature is adjusted up by pressing the 
+ or – buttons.  The drawer will store the selected 
temperature setting until it is changed.

 

7  The control buttons can be locked to prevent 

accidental changes by pressing the 

control 

lock button for three (3)seconds.  Deactivate by 
pressing for three (3)seconds again.

C U S T O M

Summary of Contents for E23BC78IPS - 22.6 cu.ft



































Reviews: