background image

4

  • 

The refrigerator must be plugged into its own 
dedicated 115 Volt, 60 Hz, AC-only non-GFCI 
electric outlet.
 The power cord of the appliance 
is equipped with a three-prong grounding plug for 
your protection against electrical shock hazards. 
It must be plugged directly into a properly 
grounded three-prong receptacle. The receptacle 
must be installed in accordance with local codes 
and ordinances. Consult a qualified electrician. 
Do not use an extension cord or adapter plug.

  •  If the power cord is damaged, it should be 

replaced by the manufacturer, service technician, 
or a qualified person.

  •  Never unplug the refrigerator by pulling on the 

power cord. Always grip the plug firmly and 
pull straight out from the receptacle to prevent 
damaging the power cord.

  •  To avoid electrical shock, unplug the refrigerator 

before cleaning and before replacing a light bulb 
or LED light. 

  •  Performance may be affected if the voltage varies 

by 10% or more. Operating the refrigerator with 
insufficient power can damage the compressor. 
Such damage is not covered under your warranty.

  •  Do not plug the unit into an outlet controlled by a 

wall switch or pull cord to prevent the refrigerator 
from being turned off accidentally.

Electrical information

Safety

WARNING

You must follow these guidelines to ensure 
that your refrigerator’s safety mechanisms are 
operating correctly.

IMPORTANT

To turn off power to your refrigerator, unplug the 
power cord from the wall outlet.

Summary of Contents for E23BC78IPS - 22.6 cu.ft



































Reviews: