92
93
3. Remove the C clamp locking the igniter to the
mounting plate and lift the igniter out of the top.
Removing the top burner orifice
mounting plate assembly:
1. Disconnect power, and remove the drip pan.
2. Release the mounting plate assembly, remove
the igniters and lift the mounting plate out.
Removing the main base:
1. Disconnect power, remove the oven door, oven
bottom, oven burner baffle and kickplate.
2. Disconnect the gas line to the ovens safety
valve and the wires from the oven igniter in the
oven safety valve.
3. Remove the rear panel and both body sides
from the range.
4. Remove the (6) screws holding the rear
insulating shield to the main base.
5. Remove the (8) screws, four on each side,
holding the side wool shields to the main base.
6. Remove the (5) screws holding the main base
to the front frame of the oven.
7. Remove the (2) screws from the L. brackets
one on each side, holding the main base
insulation shield to the side of the oven frame.